Review of tubes for plasma lifting and top 3 options for purchase

Plasmolifting – what is it?

The procedure is based on subcutaneous or intramuscular injections of blood plasma. The liquid part of the blood with platelets (it has a uniform, viscous, light yellow consistency) is obtained in a centrifuge.

Test tubes with blood taken from the patient are placed in the device, where under the influence of centrifugal force the blood breaks down into fractions. For manipulation, the middle layer is taken - it contains the maximum number of platelets.

Platelet-rich plasma is injected into problematic areas, more often at the request of those applying for plasma lifting. This could be the face, neck.

As a result, these parts look younger, since plasma, triggering natural rejuvenation processes, activates the body’s most important internal resources.

The first studies using plasma on animals were carried out in 2001. After 2 years, the procedure was performed on humans. When another 3 years passed, this technique began to be officially used in medicine.

Plastic surgeon Sam Naficy

At the end of the cosmetology event:

• blood circulation and cell division accelerate;
• collagen production is enhanced;
• the capillary structure grows;
• metabolism accelerates;
• cell nutrition increases.

Plasmolifting is also carried out on the scalp, which improves the structure of the hair and fights baldness. This procedure may also be beneficial for joint health.

If the event is carried out with violations, blood accumulates in ordinary test tubes, a guaranteed result from plasma lifting should be expected to a minimum. Often it is not observed at all.

Top 3 models to buy

Desktop EVA-200 made in Germany

This device is designed for processing small volumes of blood , suitable for any cosmetology clinic.

The standard equipment includes equipping the device with an angular rotor with space for 8 test tubes, and their volume can reach up to 15 ml. centrifugal acceleration reaches 3,461 g - this is an ideal option when using a centrifuge in plasma therapy.

The centrifuge is equipped with a frequency drive, which does not require constant maintenance and is equipped with a lid locking function when turned on.

Advantages:

• versatility - can be used in research laboratories;
• the control panel is clear and easy to use;
• ability to set centrifugation speeds;
• the lid closes automatically when turned on;
• quick start;
• possibility of emergency shutdown;
• quiet operation;
• ease of care.

Main characteristics:

1. Minimum speed: 500 rpm.
2. Maximum: 6000 rpm.
3. Possibility of adjusting the speed step: 100 rpm.
4. Maximum acceleration: 3461хg.
5. Button for opening the lid.
6. Special key for quick centrifugation.
7. A display showing the speed of the process.
8. Durable and lightweight plastic body.
9. The transparent lid helps you observe the process.
10. Unbalance shutdown function.
11. Dimensions: 228 x 262 x 352 mm.
12. Weight: 8 kg.

Cost – 59,900 rubles.

Laboratory SM-12-06, Russian

Equipped with : an angular rotor for 6 tubes of 5 and 15 ml, a system for stabilizing the engine. It reaches maximum speed in 20 seconds. Automatic lid lock in working order.

Main advantages:

• versatility;
• convenient display control panel;
• ability to set speed and time;
• auto closing lid;
• fast speed dial;
• works silently;
• ease of care.

Technical characteristics of SM-12-06:

1. Speed ​​range, rpm: 100-4500.
2. Acceleration: RCF 3074 G.
3. Speed ​​change per rpm: 100.
4. Braking/acceleration time: 20-80 sec.
5. Power: W 40.
6. Dimensions mm: 350x400x320.
7. Weight: 5 kg.

Price – 18900 rubles.

Medical Apexlab 80-2S made in China

A low-speed tabletop centrifuge is needed for use in clinical diagnostics and research in the field of medicine and cosmetology. Has an angled rotor for 12 tubes.

Description:

• compact product with low noise level;
• speed – from 1000 rpm to 4000 rpm;
• speed change step – 500rpm;
• torque 2130 g;
• digital display with convenient controls;
• automatic lid lock.

Specifications:

1. Size: 310×325×395 mm.
2. Low noise level – 67 dB.
3. Power: 80 VA.
4. Weight 7 kg.

Price – 14,500 rubles.

Modern technical means

Today, centrifuges for plasma lifting are complex units with electronics. It is possible to install programs in them that allow you to separately monitor the phases of blood processing.

The speed of the drum rotation corresponds to the operation to completely separate the red blood cells and prevent damage to the platelet membranes.

Expensive material is designed for one-time use. This completely protects the patient from diseases transmitted by blood-based drugs.

European brands present individual kits with sterilized wipes, needles, syringes and special tubes.

Cosmetologists positively evaluate the convenience of the case, and patients are calm about their health, since the opening of the case occurs before their eyes.

When one’s own plasma is introduced, positive changes are observed: stimulation of the synthesis of fibroblasts and collagen, and increased production of hyaluron begins. You can also notice that the reparative processes that occur in the deep layers of the skin are accelerated.

Plastic surgeon Jed Horowitz

Platelet-rich plasma is also used in smoothing out wrinkles. In this situation, the biomaterial collected for injections in a syringe without a needle is placed in a portable thermostat for plasma lifting, where it remains for 12-15 minutes.

In a unit at a certain temperature, liquid plasma is converted into a viscous gel. Gel formation is used as a filler for the reconstruction of soft tissue volumes.

5+ best varieties of test tubes

Special tubes for plasma lifting are made of inert materials that do not come into contact with blood cells.

The value of this lies in the complete exclusion of penetration of third-party substances into the plasma. There is no air in the flasks, which makes blood sampling faster and easier, while at the same time the biomaterial does not “meet” with air.

There is more than one manufacturer of such products. But some are more popular.

Plasmolifting tubes (Russia)

Plasmolifting tubes are exceptionally designed, made from high quality glass and sealed with green caps.

In the depths there is heparin and a patented filter gel - it blocks the return path to the test tube for exfoliated red blood cells and prevents mixing of dissimilar layers of plasma.

A separate flask is packed in a self-contained foil box with the indicated date of thermal sterilization and maximum time of use.

A cardboard sachet with an unbroken hologram holds 20 test tubes (the capacity of one is 9 ml). Approximately 3-5 pieces are spent on a single patient, this is due to the size of the treated area.

Regenlab (Switzerland)

Regenlab – tubes for plasma lifting of the highest quality, easy to use for specialists. Everything required for manipulation is packed into a nice box and placed in self-contained airless packaging.

This Swiss manufacturer presents 4 types of tubes designed in relation to the results that are expected to be achieved:

1. Matrix vessels with already added hyaluronic acid to provide noticeable hydration to the skin and stimulate additional collagen production. Such injections are especially indicated for patients in the 40+ group who are dissatisfied with dry and sagging skin, multiple wrinkles, and blurred facial contours.
2. BCT are tubes with blue caps, designed for medical procedures, with sodium citrate inside (a special stimulant). The activator prolongs the vital activity of platelets, thereby increasing the quality of plasma.
3. ATS - with a red cap, inside there is a substance, under its influence the liquid plasma becomes condensed and converted into a gel. It is used to smooth out wrinkles, correct the face and eliminate visible signs of aging skin.
4. Regen ACR-Extra is a set of flasks that improve the structure of the skin and fight initial aging. For mature skin, red vessels Regen ACR - C Plus are suitable. Inside each there is an effective autogel, it models the oval of the face at the cellular level, stimulates the production of platelets

These tubes have been certified in the Russian Federation and are approved for use in cosmetology.

At a minimum, the case costs 200 USD. Consequently, the cost of the plasma lifting procedure is set no lower. A lower price for manipulation indicates that, most likely, a counterfeit product is provided.

Autosoma (Greece)

The tubes containing sodium citrate and separating gel are sealed with blue caps. The cost of Greek options is many times less than Swiss ones, but the quality, according to cosmetologists, is quite acceptable.

At the same time, the manufacturer advises to carry out plasma lifting not according to the generally accepted method with injections, but through the use of a dermaroller.

It is claimed that after using the device, the density of treatment of the problematic area increases, and the plasma is not allowed to “work” in the deep layers of the skin.

The effectiveness of manipulation is manifested in the prevention of premature aging and relief from wrinkles.

You can find test tubes and sachets from US manufacturers on the Internet. These are Arthrex Angel, Emcyte Genesis CS, Arteriocyte Magellan, Harvest SmartPrep, Biomet GPS III, etc.

In the Russian Federation, these products are not popular because the cost is too high. And it is not adapted to the centrifugation capabilities of devices from Europe. And the Israeli products Cellenis PRP System (Tropocells PRP) are completely unknown in the Russian Federation.

Information for cosmetologists:

• Areas and techniques for platelet autoplasma injections
• Using the Plasmolifting™ method, platelet autoplasma is introduced into the areas to be treated and rejuvenated.

In cosmetology, platelet autoplasma is most often injected into the face and décolleté. Currently, the following techniques for administering platelet autoplasma have been developed:

Reinforcement: Nappage, pappule technique:

• Plasmolifting allows you to remove swelling, especially in the area of ​​the nasolacrimal groove, caused by overcorrection with filler.

Purchasing quality test tubes

Initially, such flasks must be sterile and safe. After all, when working with them, the doctor expects to completely eliminate his contact with the patient’s blood.

Other characteristic properties of the tubes are also no less significant for performing plasma lifting; they include:

• ease of operation due to the fact that the original flasks do not contain a mixture of separated plasma mass. Such vessels make it possible to work with biomaterial at any angle of the centrifuge;
• the processed substance must maintain the necessary therapeutic qualities. This is achievable only when operating with hermetically sealed test tubes;
• strength and reliability, giving products the ability not to split, not to crack, not to explode;
• hypoallergenic - there are no toxic ingredients in the administered substance, this ensures complete isolation of the plasma from bacterial decomposition.

A session with high-quality flasks reduces the procedure time by 10-12 minutes.

Plasmolifting tubes that are superior to competitors are made from bromo-butyl rubber material. The set contains a durable borosilicate glass flask and separated gel.

They are made from first-class materials, so the products in the kit last for a long time.

The test tubes can be inverted, placed on the tabletop in the chosen position, and shaken. Nothing will cause mixing of plasma with centrifuged blood portions.

When choosing test tubes, you should not “buy” into the low price category. It is correct to purchase test tubes on the official websites of manufacturers.

A package of 20 test tubes costs 8,000 rubles. (cost 1 piece 430 rub.). A box of 50 flasks can be easily ordered at a price of 16,500 (1 piece costs 290 rubles).

What substances are usually contained in plasma lifting tubes?

The products contain an anticoagulant. Its role is played by sodium heparinate. In a test tube, sodium ions are present in small concentrations, so side effects during a cosmetic procedure are observed quite rarely.

The main active ingredient present in the test tube is a special gel. Thanks to it, the blood is divided into three fractions: plasma, red blood cells and a fraction containing a large number of platelets. At the same time, all properties of the blood remain the same.

Original or fake (How to tell the difference?)

Since the plasma lifting procedure is extremely popular among patients, many inexpensive counterfeits from China are released onto the market.

Of course, good products are also produced in this country. But only if this is reflected in contracts officially signed with manufacturers and the products produced are strictly controlled.

It is known that the quality of Chinese fakes is difficult to distinguish from the original in comparison with the original. Indirect signs will help you figure it out.

1. Lower price than genuine samples - cheap test tubes cost several times less.
2. Low-grade packaging is not vacuum-sealed foil, but ordinary plastic or a combination of it with paper wrapper.
3. There is no “Plasmolifting” inscription on the box or it is written in Russian.
4. There is no certificate, although it is certainly attached to each individual batch of a branded product.

In the process of performing plasma lifting, it is necessary to focus on opening expensive materials. A conscientious doctor begins opening only with gloves in front of a particular patient.

If it turns out that a specialist has prepared a test tube without a sachet, you should not hesitate to demand to show which flask he is going to carry out the procedure with. Most likely, this is an inexpensive counterfeit, offered to the patient at the price of the original.

Summing up

The result of the procedure depends 90% on the quality of the tubes, equipment and strict adherence to the rules for plasma lifting. Therefore, when choosing a clinic, do not be afraid to ask questions. Check whether there are quality certificates for the test tubes, and whether the cosmetologist himself has a certificate of completion of training at a seminar organized by the company that developed the method used.

To be sure that the specialist really uses original test tubes, before going for the procedure, it is worth asking what company’s technology will be used to perform it. And then go to the manufacturer’s official website. There are numerous photos and videos where you can take a good look at the sample and notice important details that allow you to distinguish original products from fakes.

Please note that the patient cannot buy original products. Sales are carried out only after authorization on the website and entering the individual certificate number confirming completion of training. This is done for the safety of the patient. Accordingly, the price of such tubes is high, which affects the cost of the entire procedure.

Author: Anna Alexandrova

Reviews

NADEZhDA, 40 YEARS OLD:

“Before going for plasmolifting of the face, I learned a lot about it.
Namely: when is it permissible to do it, what are the contraindications, how many tubes are needed. I chose a doctor certified and trained in the technique, and made sure that the blood collection tubes were original.

And now I am happy with the result after the 2nd procedure. I follow all the doctor’s recommendations. I’m very pleased!”

LARISA, 35 YEARS OLD:

“After 3 plasma lifting procedures, the effect was impressive: the skin was tightened and refreshed.
But not to say wow. From experience, before the procedure you need to donate blood for a general analysis. And if the platelets are below the normal limit, then the manipulation will be useless. I also noticed that without anesthesia, although it hurts more during injections, the results are more noticeable.

And another piece of advice for those who have planned an important meeting or a trip to a restaurant in the next 3 days. It is better to postpone plasma lifting, as bruises and red spots from injections will appear after it. You probably don’t want to put tons of makeup on your face.”

EVGENIYA, 30 YEARS OLD:

“I was dissatisfied with the only plasma lifting procedure.
The effect was short-lived. A course of treatment will probably help. But it is painful and expensive. It is also important how the injections are given. In my case, nothing was added to the plasma, the procedure was carried out quickly - the vital activity of the plasma was about 2 minutes. I think the method is effective in cases of skin restoration, for example, after burns. But I didn’t apply for a repeat session.”

Contraindications (5 prohibitions)

The procedure is not performed for exacerbations of chronic diseases. If there are pustular formations on the epidermis, the infection can spread.

During menstruation you should also refrain from the procedure. There are other restrictions on the conduct.

CONTRAINDICATIONS

1. gestation period, GW;
2. hypertension;
3. disorders of coagulation hemostasis;
4. emotional lability;
5. severe diseases of internal organs.

Expert opinion

• Surgeon
• Surgeon

Elsa Borodina

plastic surgeon

We often use tubes for plasma lifting manufactured by Israel. I think they have the best price/quality ratio. They speed up the procedure, but for the patient the test tube model does not affect the result in any way. The result of PRP is influenced by the quality of the blood and the model of the centrifuge (should be 2000-4000 revolutions). Patients over 50 years of age usually have low platelet counts (thrombocytopenia). That is why plasmolifting in this case changes to mesotherapy with ready-made stem cells (animal products).

Michelle Place

plastic surgeon

The quality of test tubes, as well as equipment, adherence to all norms and rules affects the final result (by 90%).
That is why you need to choose a good doctor, and do not hesitate to ask him any questions you may have. You can also ask to see equipment certificates. There are many important points in carrying out plasma lifting. And the “correct” test tubes are not the last place in the process. That is why it is worth not only asking doctors what products they will use, but also checking the veracity of the doctor’s words.

Where to buy a quality product

It’s a risky idea to buy the cheapest test tubes in an online store. In this case, there is a huge chance of purchasing counterfeit or low-quality products. It is better to purchase cones from official dealers or directly from the manufacturer. This way you will clearly see what factors make up the price, and the products themselves will be 100% effective and high quality. Among other things, many companies offer good discounts and bonuses for wholesale buyers, which, of course, will allow you to save a lot of money.

You also need to study consumer reviews and product descriptions in order to make the right final decision.