Lasers for hair removal with registration certificate

Palomar Star Lux 500, Lux nozzle 1540

A real alternative to laser resurfacing and surgical circular facelift, long lasting lifting effect.
The modern method of non-ablative fractional laser rejuvenation will quickly and safely stop age-related changes, get rid of wrinkles, restore skin elasticity and excellent appearance.

We are pleased to offer you rejuvenation procedures using the American Palomar Star Lux 500 system and the Lux 1540 attachment, recognized today as the “gold standard” of fractional laser technologies. Today, many manufacturers equip their devices with fractional modes. But it was Palomar Medical Technologies that in 2004 was the first in the world to patent the fractional principle of laser exposure.

Procedures using the Palomar Lux 1540 laser provide an excellent, very natural, lasting effect of skin rejuvenation by enhancing its internal resources: stimulating the production of its own collagen and improving microcirculation. Moreover, the result is visible after the first procedure: wrinkles disappear, the oval of the face is tightened, the skin begins to glow. With the help of Palomar, you can even treat such traditionally “difficult” areas as the crow’s feet area.

What to choose?

But let’s say all the pros and cons have already been weighed, and you are enthusiastically searching for clinic addresses on the Internet. Time to decide: so, in the end, Fraxel or Palomar? On women's forums they argue about this for hours, and for good reason: the manufacturers of both lasers have something to say in defense of their brainchild.

Factor one: experience and authority. Since Fraxel is “older” and began to be used in cosmetology much earlier, it is often trusted more. However, those who have the courage to try new things often become fans of Palomar, especially since the fractional technology used to create it has been improved. So, sometimes in solving the dilemma “Fraxel or Palomar” it is not so much the advantages and disadvantages that matter, but conservatism or, on the contrary, the inquisitive mind and curiosity of those ladies who are interested in this technology.

Since Fraxel is “older” and began to be used in cosmetology much earlier, it is often trusted more.

Factor two: time is money. Well, you will need money in any case, but the time spent can be reduced if desired. On Fraxel devices, treatment sessions last one and a half to two hours, while Palomar “does its job” in about 50 minutes, or even half an hour - it all depends on the specific task. In addition, specialists who practice using Palomar lasers claim that due to the deepest penetration of rays into the skin layers, the number of procedures is reduced. But it is difficult to imagine how justified this will be in each individual case, because each patient is prescribed an individual course of treatment - everyone’s goals are different, and so is the skin.

Factor three: with or without anesthesia? Painful sensations have already been mentioned above: some suffer from them, while others do not experience them at all. So, this is why representatives of the first category usually choose Fraxel laser treatment - in this case, anesthesia is used. On the other hand, an anesthetic cream is applied before skin treatment precisely because the procedure is quite painful. In Palomar devices, the cooling element is located differently, due to which the pain is limited to a slight tingling sensation.

Aging problems solved with Palomar Lux 1540:

• • Wrinkles on the face, neck, décolleté, hands
• • Wrinkles around the eyes, crow's feet
• • Loss of elasticity and skin turgor
• • Poor/uneven skin texture
• • Gravitational ptosis (sagging), including the upper and lower eyelids

The essence of the method

Laser light is applied to the surface of the skin not in a single front, as when using conventional lasers, but “pointwise”, in the form of a beam (fractions) of many microscopic rays. This guarantees high precision and penetration, and at the same time, complete safety of the procedure. As a result of exposure to a fractional laser, a large number of microscopic treatment zones are formed in the skin, in which new young tissue is rapidly formed. Cells located near the treatment zones are also involved in this process and are actively renewed. As a result, the skin is evened out, acquires a smooth and even appearance, and the newly formed collagen-elastin framework gives the skin density and elasticity, eliminates wrinkles, and outlines the correct oval of the face.

Palomar rejuvenation - results

• • The results will be visible within a week after the first fractional rejuvenation procedure: wrinkles and crow’s feet disappear, pores become smaller, the texture and color of the skin improves, the skin acquires a healthy glow, its turgor is restored, and a clearer oval of the face is outlined.
• • To obtain the maximum effect, it is necessary to conduct 3-5 sessions (sometimes less) with a frequency of 3-4 weeks.
• • The effect of fractional laser rejuvenation not only remains, but also increases within six months after completion of the course.

A week after the first procedure, you will look 5 years younger! After a course of procedures (3-4 sessions) - minus 10 years or more!

Photo: palomar laser rejuvenation

Rehabilitation

Unlike most rejuvenation techniques, as well as competing devices, Palomar guarantees a minimum rehabilitation period. In the first 3-4 days, redness of the skin and slight swelling in the affected area are possible. If you follow the post-care recommendations of our dermato-cosmetologist, the rehabilitation period will be as comfortable as possible for you.

MEDICAL PROCEDURES WITH ONE OF THE BEST LASERS IN THE WORLD

The key to the success of any laser hair removal procedure is high-quality equipment, as well as the experience and qualifications of the cosmetologists who work on it.

Laser hair removal of the face and body in our clinic is performed using a professional diode laser PALOMAR VECTUS, which is produced by the recognized world leader in the field of laser technologies - CYNOSURE Holding (USA).

It was not by chance that we chose PALOMAR VECTUS: laser machines with such technical characteristics and innovative patented technologies that could compare with PALOMAR VECTUS in terms of the final result simply do not exist on the global and Russian aesthetic medicine market.

The unique effectiveness of Palomar Vectus laser procedures is ensured by two main parameters: 1) power - allows you to cause instant thermal denaturation of a hair follicle located deep enough in the skin and 2) wavelength - guarantees selectivity of exposure and absolute safety.

Advantages and benefits of laser rejuvenation using Palomar Lux 1540:

• • High efficiency. Fractional non-ablative laser Lux1540 uses much more energy per microbeam (up to 70 mJ), which allows you to successfully solve the most pressing aesthetic problems without damaging the skin.
• • Fast and convenient. The Lux1540 laser does not require the use of surface anesthesia, application of dyes to the skin, or other special preparation.
• • Safety and painlessness. Advanced smooth pulse technology with simultaneous contact cooling throughout the procedure ensures the highest safety and maximum possible painlessness compared to all other lasers available.
• • Minimum rehabilitation period. (3-4 days)
• • Prolonged lasting effect. Clinically proven results. Laser facelift doesn't just remove the symptoms of aging - it helps awaken the skin's rejuvenation mechanism.
• • Effective and gentle effect on “difficult areas”: the crow’s feet area, neck, arms.

Photo: Palomar

Palomar rejuvenation prices:

Attention! Current discounts for one procedure are 15%.

Palomar: contraindications

General absolute contraindications for laser rejuvenation are:

• • acute and chronic skin diseases,
• • decompensated stages of diabetes mellitus,
• • varicose veins (at the site of the procedure),
• • severe forms of hypertension and coronary heart disease,
• • acute forms of herpes,
• • infectious diseases,
• • keloid disease,
• • malignant neoplasms of the skin,
• • pregnancy,
• • mental illness (including epilepsy)
• • a weakened immune system due to AIDS, HIV or the use of drugs that suppress the immune system (immunosuppressants),
• • systemic immune diseases,
• • allergy to light, sun (photosensitivity).

Relative contraindications:

• • superficial and medium peels performed less than 3 weeks before the laser rejuvenation procedure,
• • insolation (sunbathing, or solarium) in the last 3 weeks before the laser rejuvenation procedure.

Laser hair removal Palomar Vectus

Low price revolution!

Laser hair removal of excess hair growth on the face and body is the most effective and popular hardware cosmetology procedure in Russia and in the world today. Our clinic's doctors have one of the latest diode lasers, Palomar Vectus™, for complete radical removal of unwanted hair.

Advantages of laser hair removal using the Palomar Vectus™ device:

• The new Palomar Vectus™, the world's most powerful diode laser for hair removal, is recognized throughout the world as the “gold standard” of laser hair removal due to its high treatment results.
• Using patented Palomar Foton Recicling technology, as well as diode technology with control of the radiation power level in the working head, Palomar Vectus™ increases the effectiveness of the procedure by 1.5 times compared to other diode lasers.
• A nanotech sapphire window with contact cooling of the working laser emitter allows for painless hair removal .
• The high speed of skin processing allows you quickly and comfortably perform hair removal on large areas of skin.
• The presence of a large and small working emitter on Palomar Vectus™ allows you to carry out hair removal procedures on various parts of the body.
• During the procedure, a special reading device determines the amount of melanin, hair density and thickness, skin color for each patient and allows you to set adequate parameters for the impact power , which increases the efficiency of hair removal and reduces the risk of possible complications to zero.
• And the best part: you will be pleased with low prices and seasonal promotions for the laser hair removal procedure using the Palomar Vectus™ device in our clinic.

Progress of the procedure

1. Before the procedure, you must shave your hair .
2. The procedure takes place without pain relief .
3. The doctor passes a special emitter over the skin , treating the area to be epilated with powerful flashes of light. The radiation penetrates to a depth of more than 4 mm. Under the influence of radiation, the melanin pigment contained in the hair follicle is destroyed, as well as the coagulation of small vessels that ensure the vital activity of the hair follicle. Over time, the functioning of the hair follicle is disrupted and hair stops growing.

Recommended intervals between hair removal procedures:

• Face: 4 weeks.
• Arms/armpits: 4-6 weeks.
• Bikini line: 4-6 weeks.
• Back: 6-10 weeks.
• Legs: 6-8 weeks.
• or as the hair grows, but not more often than after 4 weeks.

Skin care after hair removal procedure:

• The skin reaction after the procedure is similar to a mild sunburn. This reaction usually occurs within 2 to 24 hours. For severe redness, you can use Depanthenol cream;
• on the day of the procedure, it is advisable not to wet the treatment area;
• After the procedure, it is recommended to avoid exposure to the sun, visiting baths, saunas for 2 weeks ;
• Until it’s time for the next procedure, hair can be shaved and removed with depilatory cream. Do not pluck, remove with wax or depilator .

IMPORTANT! Different areas of the body may experience different dynamics of hair growth reduction after the procedure, which is associated with the duration of the growth cycle.

By choosing the Palomar Vectus™ laser hair removal procedure in our clinic, you will receive a combination of power with safety, speed with efficiency and will be satisfied with the highest results and low prices !

Indications for fractional photothermolysis

The fractional photothermolysis procedure is indicated for the following aesthetic skin problems:

• small facial wrinkles (including around the eyes and mouth);
• wrinkles of different depths;
• deformation of the dermis after acne;
• postoperative scars;
• stretch marks of various etiologies (hormonal, postpartum, due to weight loss);
• any signs of aging and withering of the skin;
• hyperpigmentation;
• enlarged skin pores;
• loose skin on the arms, neck and décolleté;
• uneven complexion;
• capillary vascular network.

Fraxel has a lifting effect, helping to straighten the oval of the face and tighten sagging skin in different areas. After a course of therapy, the dermis is renewed, becomes smooth, tightened, and its color improves.

Candela GentleLase Pro

Registration certificate of Roszdravnadzor No. RZN 2017/5599 dated March 31, 2017.

The Candela GentleLase Pro device is the only laser in the review with a non-contact cooling system for the epidermis during the procedure. Radiation at 755 nm is most effectively absorbed by melanin. For this reason, Alexandrite lasers remove hair faster than diode lasers, but are unsafe on dark and tanned skin.

FOR REFERENCE

Ekaterina Imshenitskaya

The GentleLase series devices for hair removal are the first lasers that have been approved for use by the FDA for cosmetic purposes. Until this time, emitters were used only in medicine.

The GentleLase Pro emitter has a fluence of up to 150 J/cm2, but due to water-air cooling of the skin during the session it does not leave burns. Dynamic Cooling Device™ technology, combined with a pulse frequency of up to 2 Hz, makes the procedure relatively painless for the patient without anesthesia.

Manufacturer: Candela Corporation, USA.

Vikini ILOODA

Registration certificate of Roszdravnadzor No. RZN 2016/3708 dated February 15, 2016.

The Vikini diode laser device from the Korean company ILOODA operates in 3 hair removal modes:

1. DP1 - for working with any phototype and hair color. Energy is supplied in short pulses, long pulses, mixed mode and sub-pulses.
2. DP2 - for removing fine hair. The result is achieved through a series of short pulses of a fixed duration.
3. FDP - for hair removal in large areas. The radiation is supplied with a frequency of up to 10 Hz.

IMPORTANT!

Ekaterina Imshenitskaya

The handpiece is equipped with a collimated optical lens, which reduces the dispersion of the emitter energy and focuses it on the hair follicle. Patented Wave technology ensures consistent fluence in every pulse.

The device has one working spot 12 × 11 mm. The comfort of the procedure for the patient is ensured by a contact cooling system.

Manufacturer: ILOODA CO., LTD., South Korea.

Secrets of success in photorejuvenation of facial skin using the Palomar StarLux 500 device

• High efficiency is achieved due to the maximum possible power of exposure to pulsed light.
• No burns or complications: a special double wave filtration system ensures targeted energy absorption exclusively by melanin or dilated vessels. In this case, other skin structures are not involved in the process.
• Safety and comfort. A perfect contact cooling system ensures painlessness throughout the entire procedure. During the procedure, the skin is not damaged, as a result of which there is no rehabilitation period.
• Simultaneous elimination of various unwanted skin formations.
• Long-term cumulative result of rejuvenation.
• Saving time and money. Since after the first session there is a visible reduction in signs of aging, the course number of procedures is reduced to a minimum. To consolidate the result, it is necessary to carry out a course of 3-6 procedures with an interval of 3 weeks.

Cost of procedures

Pigmentation removal and photorejuvenation prices

Treatment of vascular skin defects

Motus AX Moveo

Registration certificate of Roszdravnadzor No. RZN 2012/13541 dated December 30, 2016.

Motus AX Moveo appeared on the cosmetology market in 2020. This is the first alexandrite laser that removes blonde hair and works on dark and tanned skin. The device differs from diode lasers in its greater fluence and efficiency, but borrows modern techniques from them:

• hair removal “in motion”;
• contact cooling of the skin;
• pulse adjustment from long to short.

FOR REFERENCE

Ekaterina Imshenitskaya

The Motus AX Moveo emitter produces single and double flashes with durations ranging from 2 to 300 ms.

Laser operating parameters:

• fluence up to 160 J/cm2;
• frequency from 2 to 10 Hz.

The handpiece is equipped with sapphire tips of your choice, sizes 5; 7; 10; 12; 14; 15; 16; 18; 20 mm. A 532nm<4mW green diode laser is used as the guide beam.

The Motus AX Moveo is used for epilation, removal of scars and age spots.

Manufacturer: DEKA MELA srl, Italy.

Contraindications to Fraxel therapy

There are a number of contraindications for fractional rejuvenation manipulations. The main ones are the following:

• a history of cancer;
• pregnancy;
• acute inflammatory processes in the body;
• infectious foci and herpes in the laser area;
• mental disorders;
• epilepsy;
• dermatitis of various etiologies in the acute stage;
• taking hormonal drugs and other medications that reduce the ability to regenerate and increase sensitivity to rays;
• severe cardiovascular pathologies;
• blood clotting disorders.

In addition, fractional photothermolysis cannot be carried out within two weeks after the procedure of chemical peeling and other cosmetic procedures that injure the skin.

The principle of fractional photothermolysis

In the process of treating problem areas with a directed laser beam, consisting of many individual microscopic beams, microthermal treatment zones (MTZs) are formed in the dermis in the form of a matrix mesh.
They are small wounds with coagulated walls, the diameter of which is approximately 100 microns, and the depth is no more than 2 - 3 mm. Due to the formed hollow tubes, instantaneous contraction of the skin occurs. The columns are surrounded by absolutely healthy tissue. In response to damage, the body's immune system launches a restorative regeneration process, activating fibroblasts. These are the cells of the middle layer of the dermis, which play the main restorative role in any damage to the connective tissue. They help heal wounds through the intensive production of collagen and elastin proteins. Thus, restoration of the basal layer of the epidermis occurs in the shortest possible time. The main application point for laser flow is the liquid medium. The upper epidermis, unlike the deep layers, contains a small amount of water. Therefore, coagulation occurs predominantly at the lower levels of the dermis, and the surface remains intact. Approximately 20% of the laser-treated area of ​​the dermis is exposed. This guarantees the safety of the procedure, reduces recovery time and practically does not cause side effects.

Ruikd Lamis XL

Registration certificate of Roszdravnadzor RZN 2020/10084 dated April 27, 2020

Ruikd Lamis XL is one of the best lasers for hair removal in terms of price-quality ratio. Chinese manufacturers like to copy its technologies in most of their budget class models:

• “Smart laser” is a system for preventing emergency situations during the procedure and equipment breakdowns;
• water-air silent cooling of the device;
• operation in short and long pulse modes;
• 2 hair removal modes: classic method and “on the move”;
• large working spot 13 × 15 mm;
• contact cooling system that protects the epidermis from burns.

ATTENTION!

Ekaterina Imshenitskaya

The resource of the Lamis XL laser emitter is 30 million pulses.

The device offers laser hair removal and laser rejuvenation procedures.

Manufacturer: RUIKD CO., LTD., South Korea.